Quality water softener installation and replacement in Ajax
Hard water is a problem half of Canadians face. High levels of minerals and salt can cause scale to form on cookware and dishes. And while the deposits are easily visible on the kettle, they will be harder to spot in the dishwasher and washing machine. In addition, hard water is one of the causes of poor laundry washing, which can lead to clothes being rough on the skin. You will also notice how mineral salts affect your hair and skin over time. Our team will help you eliminate any undesirable effects of hard water by water softener installation in Ajax.
In order not to damage other plumbing and not rush to buy a new device, it is important to know that only professionals should handle this project. Superior Plumbing and Heating specialists are better than amateurs who are unsure of their actions or do not have the right tools. With more than 10 years of combined experience, our experts can perform water softener replacement and installation at an attractive cost and on the day of your request.
Before we start, we will test your water to make sure the unit is safe. Based on the information you provide, it will be easy to select the appropriate softening equipment or pre-filter. Get a response within four hours by calling us or ordering the service online!
How to diagnose the water softener?
Before you start troubleshooting, it is important to identify the source of the problem. It can turn out to be tricky for an inexperienced homeowner, like water softener installation itself. Call our specialists to simplify the process. They will act according to the following algorithm:
- First, we will check the connection to the electricity and water supply;
- Next, we verify that the bypass valve is working properly and set all knobs correctly;
- Our expert will calibrate and adjust the timer so that the regeneration process can be done at night;
- Salt bridge formation is a common problem; we will keep it at the right level if necessary to ensure everything works as intended;
- Your resin beads could then become depleted over time; if you do not check it regularly, you may need water softener resin tank replacement in the future;
- If you find that the float switch on your tank is not working properly, an expert will empty the tank to double-check its operation.
How to install or replace the water softener properly?
Initial water testing, as mentioned above, will not only allow us to determine the type of device required but will also help us set the correct settings in the future. After this stage, we will look for a location where the softener can function properly and where it can be quickly accessed through internal communications. After that, we will take the next steps:
- We will set up a bypass brine tank sleeve if requested by the manufacturer;
- Next, we will install the water softener in its proper location;
- We will use clamps to tighten the connection between the tank of the softener;
- By cutting the pipe, we will connect it to the main water supply;
- Next,l the bypass valve will be installed;
- Our experts will attach a water supply cable to the outlet and inlet ports of the softener;
- For safety reasons, it is recommended to install an overflow pipe.
Your device might need to be repaired or replaced due to wear and tear, and other reasons. If you don’t have the skills or tools to do it yourself, it could result in having to replace all the equipment twice. The renovated water softener component (resin, tank, valve, timer, media, tube, filter) will greatly affect the replacement cost. This is how the process will look like:
- First, we cut off the water supply to the equipment and then the electricity;
- We simply close the bypass valve if it has one stem. You can also save any salt or potassium chloride that has not been used by the previous device;
- We will then loosen the clamps on the old water softener;
- Our specialist will then disconnect the distributor tube and brine valve to ensure it is completely dry;
- After we have removed your old device, we will connect it to the pipes and secure its clips to install a new water softener. We will also test the pressure to make sure it is adequate.
Do you actually need a water softener?
Homeowners often ask us “Is Ajax water hard or soft?” before starting the project. It is classified as moderately hard, and this will eventually lead to water treatment. Even moderately hard water can cause pipes and appliances to become clogged with minerals that build up over time. This can affect the ability of the plumbing to function properly. You will get many nice benefits by ordering a “water softening installation near me” from us:
- You will enjoy the better taste of food;
- After washing, your clothes will be softer and brighter;
- There will be no more scale tracks;
- Your plumbing will last longer;
- Your water will be healthier and safer.
Our specialists can provide complete servicing: not only will they install or replace your device, but they also have the expertise and equipment to maintain and repair it. We also offer a labour warranty that lasts for up to 90 days and covers any possible failures. Superior Plumbing & Heating offers a wide range of water softener installation services, OEM replacement parts, modern tools and dedicated, qualified water softener installers!