Installation of Sewers and Drains in St. Thomas
Like all plumbing work, sewer and drain installation requires planning and preparation. Specialists should visit your facility to perform an assessment and study the current state of your sewer system. After that, they will develop options for future work. The sewer installation cost in St. Thomas can be affected by these factors:
Excavation. Most drainage systems require excavation to install drainage pipes and gravel;
Pump type. In drainage systems that use a drainage pump, the type and size of the pump affect the overall cost of the project;
Size of the house. A larger house requires a larger drainage system. The greater the distance between the house and the external environment, the more expensive the project will be;
Utility lines. If additional trenches are required to prevent underground gas, water, or electric lines from being laid, this can increase the drain installation cost in St. Thomas.
Superior Plumbing & Heating offers low prices and flexible payment options for all services, whether you’re installing a new system or replacing an old one. We will also save you even more money by offering a number of specials and discounts exclusively for you!
Sewers and Drain Installation Tips
By planning and designing your drainage system in advance, you minimize costs and headaches. Here are some tips to help you if you find yourself needing to install a drainage system:
Remove obstacles. Plumbing services will run smoothly if the area is free of vehicles, outdoor furniture, and other bulky items around your home;
Determine the slope. There are certain recommended slope values depending on the length of the pipe. For example, a four-inch pipe requires a slope of 1/4 to 1/8 per foot;
Create the trench. The surface on which the pipe is to be laid should be levelled, and sand should be placed at the bottom of the trench to ensure the stability of the pipe;
Pipe laying. Start from the bottom and work your way up. The adhesive will adhere better to the pipe if you apply a suitable primer before applying it;
Final finishing touches. After you have made sure that the installation is done correctly, be sure to cover the pipe with sand or gravel and then tamp it down.
Why should you not install the sewage system yourself?
Water, despite being one of the most vital substances, is also one of the most destructive. You can’t afford to make a mistake while sewer installation in St.Thomas. You can jeopardize your health by damaging the system and incur additional costs. Turning to professionals is the best option. The specialists at Superior Plumbing & Heating follow a few steps:
- Digging a trench. The depth and width of the trench are not defined by any standards, but as a general rule, the trench should be approximately 12 inches deeper than the initial section of pipe and twice as long as the pipe itself;
- The bottom of the trench should be covered with landscape fabric and covered with sand;
- Then the trench is covered with gravel. It filters the water and screens out particles that can cause blockages;
- The pipe is inserted into the pipe, then covered with sawdust or gravel;
- The rest of the landscaping fabric is laid on top of the gravel;
- The rest of the trench is covered with earth.
Our specialists also use the trenchless method, which does not require extensive excavation. This method allows us to lay pipes as quickly as possible and resume normal operations as soon as possible.