High-quality water softener services in Barrie!

Water is one of the few things we regularly use while eating, taking a bath or watering flowers. However, even such a thing may harm your health if it is filled with dangerous metals. As a result, your water becomes hard, which subsequently causes the appearance of deposits on appliances, clothes or dishes. Another negative effect is the frequent failure of plumbing equipment, which can lead to heavy expenses. The only correct and effective solution is to install a water softener.

Keep in mind that although the above-mentioned process is a great way to perform mineral removal, it can be challenging for an inexperienced homeowner and dangerous for your property and the device itself. By trusting professionals like Superior Plumbing & Heating to do the work, you are guaranteed to get the correct water softener installation or replacement at the lowest possible cost. Our advantages include the following:

  • Each of our plumbers has 10+ years of experience, which is proved by top certifications like Red Seal and North American Technician Excellence (NATE);
  • We have a rapid workflow, which means that your device will be installed or repaired in the shortest possible time;
  • Additionally, we configure your device for proper settings and correct operation, attaching carbon filter, pre-filter, etc.;

Remember that the key to the extended life of a water softener is its proper installation, carried by professionals in the water treatment field. Don’t be afraid to call us even at night – the Superior Plumbing & Heating team is eagerly waiting to show their skills!

professional water softener installation services by an expert in Barrie

How to diagnose the water softener?

Finding the cause of a malfunction can be difficult, but our experienced technicians will provide maintenance and find affordable solutions. Apply this simple algorithm:

  • Try to check the bypass valve. A broken element will prevent the water from passing through the device and producing soft water. If you face a similar situation, get in touch with an expert for restorations.
  • Inspect the salt reservoir. Gently knock on the salt bridge to break it up if one has developed inside.
  • Pay attention to the tank’s resin layer. It may be depleted with time, reducing the general device’s efficiency. In this case, you should call our specialist for the water softener resin tank replacement.
  • Lastly, correctly set a timer for the recovery process – it would be better to schedule it when you’re sleeping or at work

How to install or replace the water softener correctly?

Before starting the project, we always test the water. Our water softener installers will select the type of device needed based on the information received. After finding a suitable location, allowing to have access to all internal communications, we will follow these steps:

  • We will set a bypass valve needed to stop the water from going through the appliance;
  • Then, we will either use flexible pipes or a hard connection to get linked up to the water main;
  • Next, drainage piping should be linked to remove the brine tank and regeneration cycle water;
  • The next-to-last step is opening the water supply and configuring the device for correct operation;
  • To eliminate air and guarantee effective functioning, a flush cycle should be conducted. Also, we will ensure that any potential leaks are addressed as well.

Although water softeners usually operate silently, this does not mean they will serve eternally. Having conducted a diagnostic and discovered that your device needs to be changed, our specialist will do their best. Please note that our final water softener replacement cost will depend on which component we have to change – resin, tank, valve, timer, media, tube or filter. We will follow these steps:

  • Cut off the electricity to the existing device and close the water shut-off valve;
  • Then, we will set the bypass valve and save any usable salt or potassium chloride in the previous unit.
  • The next step is to take off the fasteners that are securing the inlet and outlet of the water softener and disconnect them from the copper lines;
  • After that, we make sure the brine valve is dry by disconnecting the brine tubing;
  • Then, take out the contents of your current device and install the new water softener by attaching it to the lines and securing the clips. Also, we verify that the pressure is enough.

Do you actually need a water softener?

When you live in Barrie, you regularly face the consequences of calcium, magnesium, and manganese minerals in your plumbing. And it is not surprising – depending on the neighbourhood, the hardness can vary from 8 to 21 grams per gallon. Accordingly, water softener installation in Barrie is necessary not only to increase the lifespan of your plumbing but also to avoid the negative impact of pests-included water on your skin and hair.

In our opinion, it’s hard to overestimate the impact this element of the plumbing system makes on your home:

  • Soft and bright clothes fabric;
  • No more traces of scale;
  • Extending the service life of equipment like dishwashers, washers, and kettles;
  • Cooked dishes will be much tastier;

Stop googling “water softener installation near me” when the Superior Plumbing & Heating team is always around the corner and ready to be at your doorstep, even on the same day. Book an appointment online or consult with us via our round-the-clock telephone support – high-quality and prompt water softener servicing using OEM replacement parts is no longer a dream with us!