Best Water Softener Installation & Replacement Services in London, Ontario

Half of Canadians experience the effects of hard water. As a result, a high concentration of salts and minerals may leave a film of scale on your dishes and cookware. But, if the accumulation of deposits can be easily found on the kettle, it will be much more difficult to detect them in the dishwasher or washing machine. In addition, hard water is one of the reasons for poor laundry washing, which may make garments feel rough against the skin. Moreover, over time you will be able to notice the damage to your skin and hair, which often happens due to the excess mineral salts. To eliminate all undesirable consequences, our team offers you a one-stop solution – water softener installation in London.

It is important to understand that such a project should be executed by experienced professionals to avoid harming the rest of the plumbing and not rush to the store for a new device. If you are unsure of your actions, do not have the necessary tools, and will perform the installation by DIY methods, you better trust the whole process to Superior Plumbing & Heating specialists! Our experts with 10 years of experience have everything necessary to perform water softener installation and replacement at the lowest cost and even on the same day.

For the device to serve you as long as possible, we will carry out diagnostics and test your water before performing the work. Based on the information received, choosing the type of softening equipment and pre-filter required will be easier. Contact us via phone or schedule a service online and get a 4-hour on-site response!

professional water softener installation services by an expert in London

How to diagnose the water softener?

It is essential to properly identify the root of the problem before you start troubleshooting. Sometimes, making it on your own to an inexperienced homeowner can be challenging, as the water softener installation itself. Simplify this process by calling our professionals – they will follow such algorithm:

  • First, you pay attention to the most basic things, checking the connection to electricity and water supply;
  • Then, we check the bypass valve and ensure that all knobs are set correctly;
  • Next, our expert will calibrate the timer to make the regeneration process be performed at night;
  • A common problem is the formation of the salt bridge. If needed, we will maintain its levels to make sure everything is in working order;
  • Then, your resin beads can be depleted over time. If it isn’t checked in time, you may need a water softener resin tank replacement in the future.
  • Finally, if you notice that your tank’s float switch is failing to work properly, our expert will empty the tank and double-check the operation process;

How to install or replace the water softener properly?

As mentioned earlier, initial water testing will help not only to determine the required type of device but also to set the correct settings later. When this stage is over, we will look for a place where the softener can function normally and be quickly reached via internal communications. Then, we will follow these steps:

  • If the manufacturer requires, we will set a brine tank bypass sleeve;
  • Next, install the water softener at its location;
  • We will use clamps to secure the connections between the 2 tanks of the softener;
  • Connect it to the main water line by cutting the pipe;
  • Then, the bypass valve should be set up;
  • The next step is to attach a water supply line to the softener’s inlet and outlet ports;
  • Finally, installing an overflow pipe will prevent the tank from overflowing and is recommended for safety reasons.

Because of wear and tear and several other causes, your device may need to be replaced. Performing such a project yourself without having skills and tools can lead to the need to change it twice, paying for the whole equipment at once. The water softener replacement cost will depend on which component we have to renovate – resin, tank, control valve, timer, media, tube or carbon filter. The process itself will look like this:

  • We first cut off the water supply and the electricity to the existing equipment;
  • If your bypass valve has only one stem, we simply shut it. In addition, unused salt or potassium chloride can be saved from the previous unit;
  • Then, we’ll unfasten the old water softener’s clamps;
  • Next, our specialist will disconnect the distributor tube from the brine valve to make sure it’s completely dry;
  • At the end, once we’ve emptied your old device, we will install a new water softener by connecting it to the pipes and tightening its clips. Moreover, we will test the pressure to ensure its sufficiency;

Do you actually need a water softener?

Before performing the project, homeowners reasonably ask us, “Is London water hard or soft?». Unfortunately, it is rated as «moderately hard,» which sooner or later will lead to the necessity to conduct water treatment because of its calcium and magnesium content. As a result, pipes and appliances may get clogged with mineral particles that accumulate over time, affecting plumbing’s correct operation. By ordering our «water softener near me» service, you get a lot of pleasant advantages:

  • Your food will taste much better;
  • Your clothes will stay softer and brighter after the wash;
  • No more traces of scale;
  • Your plumbing will last longer;
  • Such water will be much healthier;

In addition, our specialists offer complete servicing: they will not only install and replace, but they can also maintain and repair your device. Additionally, we provide a labour warranty, which lasts up to 90 days and covers all possible breakdowns. Modern tools, OEM replacement parts and qualified water softener installers – Superior Plumbing & Heating has everything to protect your water system against dangerous metals!