How do I know if my drain is clogged?

In the kitchen or bathroom, a clogged drain can be incredibly annoying in Mississauga. Of  course, it is impossible to ignore such problems. Sooner or later, the clog will become of such magnitude that water simply will not flow down the pipe into the sewer. Especially the situation can get worse if various debris gets inside. However, we do not exclude more extreme options. So what to do when the water does not flow down into the drain or this process is very slow? The answer is, of course, one thing: cleaning!

Minor annoyances or severe disasters

We can handle nearly anything in one go, guaranteeing you that the solution will be affordable and long-lasting.
Order the best specialist in Canada Now (289) 210-4946

Tips for preventing blocked drains

The problem of clogged sewer pipes can affect everyone, so you should carefully observe how the water goes down. To be able to clean the sewer quickly, it is necessary to get acquainted with the types of clogs and where they accumulate in the pipeline. If you know exactly where to clean, the process will go much faster. Here are some tips:

  • Do not save on water with obvious fanaticism. If the sewer pipes do not get the necessary amount of liquid for their natural cleaning, then expect disaster. The sewer system needs hot water, which at the initial stage can still cope with light grease deposits and prevent their accumulation. In such compositions, be sure to rinse a few times or unscrew the water tap for a few minutes.

  • Keep a close eye on the liquid level in the sewer wells. This rule applies first and foremost to owners of private homes. If you do not, the contents of the well can come out through the blocked drain in Mississauga or through holes in the sanitary units in your home. This is especially dangerous if the system is not equipped with a check valve on the outlet pipe, and if it happens even on the first floor, where the height difference with the liquid level in the well will be minimal, you will certainly be flooded.

  • Do not trust the work on the distribution of sewer pipes and arrangement of the system as a whole by dubious workers.

  • Do not forget that all items and sewage pipes are no exception, and have a certain resource. Exceeding it, you condemn yourself not only to the risk of failure of the entire system but also to the use of water-containing particles of rust. Replace sewer pipes in time.

  • Regularly check that the liquid level in the drain well does not exceed the permissible level.

What is the easiest way to unclog a drain?

There are many factors for clogging drains, so to avoid this happening, follow them:

  • improper installation of the drain pipe;

  • hard water has caused salts to build up;

  • large objects are stuck;

  • debris – such as sand – has been deposited;

  • the clog is caused by by-products that have washed out;

  • violations in the operation of the equipment.

  1. If the sewer pipe was laid with a violation of technological standards, for example, with an insufficient slope, then during the clogged drain cleaning in Mississauga there is a gradual accumulation of sediment in the pipe. Over time, this can lead to blockages. In addition to the natural products of human life, water contains minerals that are also deposited inside the pipe.

  2. Grease deposits. Fatty deposits build up little by little over the years before they lead to serious consequences. The period of accumulation depends on the quality of the pipe material and on proper installation. Fat deposits are not uniform in their thickness. Their inner diameter is softer and has a jelly-like consistency, while the outer diameter, which adjoins directly to the inner wall of the pipe, is very hard. This is because it is gradually reinforced by the various fibers that enter the drains.

To make sure that your clogged drain repair goes the best way possible you need to choose a qualified technician who knows all about sewers in Mississauga.

  1. Mechanical clogs. Compose only 10-20% of all cases. Mechanical clogs refer to various objects that, in principle, should not enter the sewer system.

  2. Mechanical damage to the sewer system can be caused by solid foreign objects. In private homes, outside sewer pipes can be damaged by tree roots. They can wrap around the pipe and simply crush it. In this place, chipping will form, and its edges, according to the laws of physics, will protrude inward. It will serve as a barrier to the passage of water and will stop various debris, which will lead to the rapid formation of plugs.

  3. Exceeding the life of the sewer. Even if the distribution of pipes in your system is done correctly, but they are many years old, you are still in the zone of risk.

Our experienced specialists will do their best to make sure there is no clogged drain anymore.