Needless to say that is important to clean drain pipes and tube bundles of heat exchangers periodically. The very principle of hydro jetting in Mississauga is based on applying a water jet as a working body, which is supplied under high pressure through special nozzles. Professionals use various modifications of hydro heads to work in conditions of different pipe diameters and different thicknesses of deposits as nozzles.
Here in Mississauga, we can explain how to clean the pipes effectively with high-pressure water devices. The advantages are as follows:
- Compared to traditional methods, high-pressure water cleaning has a lot of decisive advantages. There are no alkalis, acids, or other chemical reagents used during cleaning, which creates problems related to the preservation of the environment.
- Experts effectively remove all kinds of deposits regardless of their physical properties and chemical composition.
- It is possible to clean the pipes when they are entirely clogged.
How does Drain Jetting Work?
The experience of hydro jetting services in Mississauga shows that the most significant pressure for cleaning is 500–1500 bar. In exceptional cases, where there is a problem cleaning particularly hard sludge, it may be necessary to use an ultra-high pressure monitor up to 2500 bar. The water jetting method completely restores pipes from 10 to 150 mm in diameter and more.
Direct drain jetting in Mississauga and the inter-pipe space are made with nozzles selected considering the diameter of the pipes and the nature and thickness of the contamination. The reactive force of the water jet, due to the location and orientation of the holes in the nozzles, gives the nozzles a forward and rotating force (in rotating nozzles).
The front nozzle’s destruction process starts when using nozzles with front or two intersecting front jets. It is possible to use nozzles with both flexible peaks and stiff peaks. However, some nozzles predominate frontal jets and require a force-feed that you can only utilize with stiff peaks.
Is Hydro Jetting Safe for Old Pipes?
Here you need to look at the current state of drainage pipes. An expert can assess the state of drainage only after a personal examination. So why is it essential to clean pipes regularly and on time?
- Untimely flushing leads to the accumulation of contaminants and the formation of hard-to-remove deposits on them.
- The cost of restoring operating parameters in neglected cases is much higher than the cost of routine flushing.
- The prolonged absence of regular hydro jet drain cleaning can lead to emergencies.
How Much does Hydro Jet Drain Cleaning Cost?
Again, the cost of sewer jetting in Mississauga is determined individually and depends on the condition of the drain, the frequency of flushing, and other factors. Almost all experienced experts recommend flushing once a year. The occurrence of the need to clean the drain directly depends on the operating conditions and is determined individually.
If you avoid cleaning the drain for a long time, the best choice is to perform a collapsible cleaning, in which case it is vital to pay special attention to the condition of the seals. To find out the hydro jetting cost, contact us.
The average service life of the seals is 7 years, so if the seals that require flushing are older than 7 years, the service department will offer to replace them with the heat exchanger flushing.
If you order operational flushing regularly and expertly, a specialist can do the following procedure without disassembling the pipes. He can easily do it by circulating an acid solution of the cleaning agent in the circuit. It does not take much time and has a reasonable price.
If you neglected the flushing procedure for a long time or used hard water, deposits on the internal surfaces can significantly degrade the heat exchange processes and provoke system failures.